Celotex PL4025 Thermal Insulation Board 25mm/12.5mm x 1200mm x 2400mm
£43.80£36.50
In stock
SKU
285500250
Product Description
Celotex PL4025 thermal insulation board 25mm is a high-quality polyisocyanurate (PIR) 2-in-1 insulation board with a paper facing, laminated to a piece of 12.5mm tapered edge plasterboard. Available in thicknesses from 25mm to 65mm (insulation only), it can be considered for use in roof and internal wall lining applications.
What is Celotex PL4025 Thermal Insulation Board 25mm? Celotex PL4025 25mm reduces heat loss in your building while drylining walls or ceilings in one application with the structural integrity of 12.5mm plasterboard – achieving maximum installation speed. This product has a tapered edge which means joints are seamless and invisible under the paint as well as providing the perfect surface for tiles.
It has a thermal conductivity of 0.022 W/mK and is suitable for dot and dab. It has been rated B-s1 on the Euroclass Fire Classification, meaning limited combustibility.
Features and benefits of Celotex PL4025 Thermal Insulation Board 25mm:
Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
Easy to install – Celotex boards are light and rigid assisting with ease of transportation, handling, and fitting.
BBA certified – Celotex has been assessed by the BBA as fit for use in plasterboard thermal laminate applications if installed, used, and maintained as set out in the certificate.
Please read the certification for full details and restrictions.
Time-saving – Celotex brings together both insulation and plasterboard creating a 2-in-1 solution to insulate and dry line walls or roofs at the same time.
Celotex achieves a BRE Green Guide Rating of A+, which can assist in demonstrating environmental performance in your BREEAM assessments.
Board/roll size: width 1200mm, length 2400mm
Thickness: 25-65mm (+12.5mm plasterboard)
Material: PIR plasterboard laminate
Applications for Celotex PL4025 Thermal Insulation Board 25mm:
What is the difference between the the Celotex PL4025 and the 4000?
The Celotex PL4025 is a high-quality 25mm polyisocyanurate (PIR) 2-in-1 insulation board with a paper facing, laminated to a piece of 12.5mm tapered edge plasterboard.
Celotex PL4000 is the product tage name which consists of PL4025, PL4030 and PL4050.
Celotex GA4000 is is an easy-to-install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing.
Is PL4000 a thermal laminate board?
Celotex PL4000 is an insulated plasterboard also known as a thermal laminate board. The product combines a Celotex insulation sheet bonded to a 12.5mm plasterboard.
What is the thickness of the PL4025?
The Celotex PL4025 board combines a 25mm insulation board with a 12.5mm plasterboard. The total thickness of the board is 37.5mm
Does the Celotex PL4000 have a vapour layer?
Celotex PL4000 has a vapour control layer built in, which is positioned between the plasterboard and Celotex foam insulation.
What Is A U-Value? In relation to insulating the home, a U-Value is the flow and loss of heat through the materials that make up the building itself, including bricks, flooring, roofing and windows. The U-Value is measured in watts at the rate of heat transfer. The important point to note is that the lower the U-Value is, the...
As a home owner, it’s important to check the insulation in your property on a pretty regular basis. It can be a crucial aspect of living a comfortable life that is often overlooked. Check out our guide on the steps you need to take.
Celotex vs Kingspan When looking to purchase insulation products, there are two big names that will constantly crop up: Celotex and Kingspan. Both are very experienced in their field and offer a range of fantastic thermal and acoustic insulation products, suitable for insulating roofs, walls and floors. There are plenty of questions regarding the difference between the two, which...
