Celotex PL4050 Thermal Insulation Board 50mm/12.5mm x 1200mm x 2400mm
£58.74£48.95
In stock
SKU
285500500
Product Description
Celotex PL4000 is an easy-to-install polyisocyanurate (PIR) 2-in-1 insulation board with a paper facing, laminated to a piece of 12.5mm tapered edge plasterboard. Reducing heat loss while offering drylining, this product is available in thicknesses from 25mm to 65mm (insulation only), it can be considered for use in roof and internal wall lining applications.
What is Celotex PL4050 50mm? Celotex PL4050 50mm insulation board has low-heat transfer properties combined with the structural integrity of plasterboard. The board is polyisocyanurate, meaning it is rigid and lightweight, so is easy to handle and install. The unique tapered edge design allows joints to become invisible when painted, cutting down installation time while giving a clean finish.
Celotex insulation products have been rated as having zero ozone depletion potential (OPD) and low global warming potential (GWP) as they have been manufactured using a blend of blowing agents.
Features and benefits of Celotex PL4050 50mm:
Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
Easy to install – Celotex boards are light and rigid assisting with ease of transportation, handling, and fitting.
BBA certified – Celotex has been assessed by the BBA as fit for use in plasterboard thermal laminate applications if installed, used, and maintained as set out in the certificate.
Time-saving – Celotex PL4050 brings together both insulation and plasterboard, creating a 2-in-1 solution to insulate and dry line walls or roofs at the same time.
Celotex achieves a BRE Green Guide Rating of A+, which can assist in demonstrating environmental performance in your BREEAM assessments.
What are the advantages of using a thermal laminate board?
Celotex PL4000 combines both the insulation and plasterboard, creating a 2-in-1 solution to insulate and dryline walls or roofs at the same time, creating a time saving product.
What is the difference between the Celotex PL4000 boards and the GA4000?
PL4000 is a 2-in-1 product with the insulation board laminated to a sheet of 12.5mm tapered edge plasterboard. The GA4000 range is an insulation board with only a foil facing to both sides.
What thickness insulation is on the PL4050 board?
The Celotex PL4050 total thickness is 62.5mm. This consists of a 50mm insulation board bonded to a 12.5mm plasterboard.
How thick a PL4000 Celotex board should I use on my external wall? It can get very cold in winter.
The Celotex PL4000 is a very good insulated thermal laminate. When deciding on the thickness to use, the desired result has to be considered. While the thicker the board the better performance can be expected, this needs to be balanced with the space this will take within the room and around openings such as windows/doors.
What Is A U-Value? In relation to insulating the home, a U-Value is the flow and loss of heat through the materials that make up the building itself, including bricks, flooring, roofing and windows. The U-Value is measured in watts at the rate of heat transfer. The important point to note is that the lower the U-Value is, the...
As a home owner, it’s important to check the insulation in your property on a pretty regular basis. It can be a crucial aspect of living a comfortable life that is often overlooked. Check out our guide on the steps you need to take.
Celotex vs Kingspan When looking to purchase insulation products, there are two big names that will constantly crop up: Celotex and Kingspan. Both are very experienced in their field and offer a range of fantastic thermal and acoustic insulation products, suitable for insulating roofs, walls and floors. There are plenty of questions regarding the difference between the two, which...
